A robot injects vacuum is applied to the TAD-233 2-component equipment in the vacuum chamber in this system.
COMPONENTS:
- Body Cashing
- Tank: (1) Resin Tank & (2) Hardener Tank
- Mixer Unit – select certified mixer for better mixing of resin/hardener.
- Pressure gauge A, B
- Ratio valve A, B – Adjust the mixing ratio of resin and hardener
- Cleaning tank
- Dispensing Valve
- Separator A, B
- Controller – easily adjust the deposit volume and dispensing speed by the auto timer and motor speed.
- Vacuum pump
- Cleaning unit – perform the second cleaning perfectly by air and cleanser after finishing dispensing
- Pressure switch
- Drive motor
- Pump: (1) Resin Pump & (2) Hardener Pump – use the exclusive pump for two parts of dispensing materials, considering each specific properties of two liquids.
FEATURES:
- Possible to agitate resin and adjust temperature within tanks
- Structure with stable mixing ratio
- Complete deaeration (Removing bubbles)
- Complete mixing
- Built-in stabilizing device
- Automatic washing
- Quantity dispensing
Model | TAD-233 |
Mixing | Static mixer |
Pump | Gear pump with abrasion inside |
Tank | Resin 20L & Hardener 20L |
Applied materials | 2-liquid type epoxy, silicone, urethane |
Viscosity | 1 ~ 80000 cps (25ºC) |
Ratio | 100 : 10 ~ 100 : 100 |
Volume | Higher than 0.2cc/min |
Accuracy | ±3% (max) |
Dimension | 600 (W) x 800 (D) x 1155 (H) |