3M™ Fastbond™ Contact Adhesive 30NF is water-dispersed, sprayable contact adhesives for high immediate bond strength and long bonding range.
FEATURES:
- Non-flammable in the wet state.
- Post-formable and heat resistant.
- Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas to themselves and to each other.
- 3M™ Fastbond™ Contact Adhesive 30NF has been tested and approved for use by the Woodwork Institute of California under the provisions of ANSI/HPMA HP 1983 for Type II adhesive and the heat resistance test set forth in its Manual of Millwork.
- Fastbond contact adhesive 30NF is recognized under the Component Program Underwriter’s Laboratories, Inc. Component Recognition Program Guide GSRJ2, File R14485, Door Construction Materials. For use with swinging type fire doors of the hollow metal and steel composite types rated up to and including 3 hours.
- Not recommended for drywall laminating or for bonding metal surfaces (unless metal surfaces are completely dried by force drying and protected from moisture).
APPLICATIONS:
- Marine
- Bus Production
- Special Vehicle
- Bonds glass and plastics commonly used as windows and windshields.
| Product | 3M™ Fastbond™ Contact Adhesive 30NF |
| Base | Polychloroprene |
| Color | Green when wet. Darker green when dry. Neutral, White (Wet), Clear (Dry) |
| Net Weight | 8.9 – 9.3 lbs./gal. |
| Solids (by wt) | 47-51% |
| Solvent(s) | Water Methanol <2% Toluene <3% |
| Flash Point | None – Setaflash® closed cup tester |
| Coverage:(@ 3 gms/ft2dry) | 680 sq. ft./gal |
| Viscosity: Brookfield Viscometer |
200-750 cps RVF #2 sp. @ 20 rpm @ 80°F |