For high-quality automotive lamp assembly, lighting manufacturers trust our adhesives for their design requirements and production processes.
There are two main applications when OEM dealing with housing in automotive lighting industry:
- Bonding Lens to Housing
- Gasketing for Lens Cover
- Residues Removing and Surface Preparation
And for special positions and other assistive lamps such as Head/ Fog lamps, Tail Lamps, Center High Mount Stop Lamp (CHMSL) Third Brake Lamp, we have more than two:
- Foam Gasketing
- Signal Lights
The main consideration when choosing adhesive for the light housing assembly
- Process: One-component or Two-component Adhesive, Hot-applied or Cold-applied Adhesive
- Fast and high green strength allows short cycle times and quick leak testing
- Excellent durability and high heat resistance
- Low emission (fogging) technology
For high-quality automotive lamp assembly, lighting manufacturers trust PROSTECH adhesives for their design requirements and production processes.
Adhesive Technology and Selection Guide
| Structural adhesives | Non-structural adhesives | |||||
| 1C Reactive | 2C PU | MS | 1C Non-reactive Butyl | STM | Cure-in-place Foam | |
| Key features and benefit |
|
|
|
|
|
|
| Technology | Hotmelt PU | PU | Modified Silicone | Butyls | Soft Tack Melt | PU, Silicone, Anaerobic, Hotmelt |
| Curing | Chemical reaction (by moisture and temperature) | Chemical reaction | Chemical reaction (by moisture) | Physical setting of material (by cooling) | Compression sealing | Chemical reaction |
| Application temperature | High | RT | RT | Very high | Very high | RT |
Specific Adhesive Part Number
Hotmelt PU – 1C Reactive Structural Adhesive
| Part Number | Color | Application temperature | Viscosity (m.Pas) | Density (g/ccm) | Open time (sec) | Packing unit | Application equipment type | Key Performance | Request |
|---|---|---|---|---|---|---|---|---|---|
| PUR 34-858B | Black solid | 140 °C | 22,000 @ 135°C | 1.05 | < 30 | 18kg | Bulk Melter | Higher green strength | Request Quote Request Sample |
| PUR 9350 | Black solid | 130 °C | 12,500 @ 130°C | 1.20 | < 60 | 20kg foil bag | Bulk/Bag Melter | Heat stability | Request Quote Request Sample |
| PUR 34-712A | Black solid | 120 °C | 17,000 @ 120°C | 1.05 | < 60 | 18kg | Bulk Melter | Excellent adhesion to difficult surfaces (e.g. steel, PC, BMC***) | Request Quote Request Sample |
| PUR 8831 | Black solid | 120 °C | 8,000 @ 120°C | 1.15 | < 90 | 20kg foil bag | Bulk/Bag Melter | Faster curing | Request Quote Request Sample |
PUR – 2C PU Structural Adhesive
| Part Number | Color | Application temperature | Viscosity (m.Pas @ 23°C) | Mix ratio (by volume) | Pot life @ 23°C | Adhesion Performance | Application equipment | Key Performance | Request |
|---|---|---|---|---|---|---|---|---|---|
| swift®bond 2139/1 swift®hardener 2111 | Black Beige | RT | 130,000 40,000 | 100 : 81 | 8-15 mins | Heat Resistance: 120°C Fogging: >130°C | Meter mix pump / Static mix head | Bonding well on PP (treated) & PC | Request Quote Request Sample |
| swift®bond 2140 swift®hardener 2111 | Black Beige | RT | 130,000 40,000 | 100 : 86 | 15-30 mins | Heat Resistance: 120°C Fogging: >130°C | Meter mix pump / Static mix head | Bonding well on PP (treated) & PC | Request Quote Request Sample |
| U433 + U142 | Black | RT | A: 100,000 – 220,000 // B: 14,000 – 40,000 | 100 : 22 | 5.5 min | Strength: ~1.5 MPa | Meter mix pump / Static mix head | Higher green strength Able to leak test soon after application | Request Quote Request Sample |
| U632 + U152 | Black | RT | A: 100,000 – 220,000 // B: 14,000 – 40,000 | 100 : 21.3 | 3 min | Strength: ~1.5 MPa | Meter mix pump / Static mix head | Higher green strength Able to leak test soon after application | Request Quote Request Sample |
| U642 + U154 | Black | RT | A: 100,000 – 220,000 // B: 14,000 – 40,000 | 100 : 21.6 | 3 min | Strength: ~2 MPa | Meter mix pump / Static mix head | Higher demand for low fogging at temperature up to 130°C | Request Quote Request Sample |
MS – Modified Structural Silicone Adhesive
| Part Number | Color | Application temperature | Viscosity (m.Pas @ 23°C) | Elongation | Solids | Request |
|---|---|---|---|---|---|---|
| MS 930 | Black, grey or white | 5 – 40°C | Pasty, thixotropic | Approximately 490% | 100% | Request Quote Request Sample |
1C Non-reactive Butyl Adhesive
| Part Number | Color | Form | Density | Moisture vapour transmission rate | Application temperature | Key Performnace | Request |
|---|---|---|---|---|---|---|---|
| Bostik 5000 | Black / Grey | Rubbery solid | 1.16 to 1.18 g/cm3 | < 0.1 g/m² per day for 2mm film at 25°C (77°F), 100% RH. (ASTM method E96) | +180°C to +195°C (+365°F to +383°F) (ex nozzle) | Quick-setting from the molten state | Request Quote Request Sample |
Soft Tack Melt
| Part Number | Color | Application temperature | Viscosity (m.Pas @ 23°C) | Application equipment | Key performance | Request |
|---|---|---|---|---|---|---|
| RB H378 | Black | 170 – 180°C | 200,000 @ 180°C | Standard melter, Bulk melter | Good adhesion with lens materials | Request Quote Request Sample |
| RB 4040 | Black | 200 – 220°C | 115,000 @ 210°C | Drum melter, Block melter | STM; Easily removed for disassembly | Request Quote Request Sample |
Cure-in-place Foam
| Part Number | Color | Viscosity | Adhesive Technology | Compression load deflection | Tensile strength | Elongation at break | Flame retardancy | Request |
|---|---|---|---|---|---|---|---|---|
| SONDERHOFF FERMAPOR K31 | Black or grey, other colors upon request | 900 – 200,000 m·Pas | PUR Foam | from 5 to 200 Pa at 25% compression | up to 2MPa [N/cm²] | up to 400% | up to UL- 94HF-1 possible | Request Quote Request Sample |
| EV Seal 500 | Gray | 32,000 cps | Hot Melt | 44.4 lbf - ASTM (C972) (50% Compression) | 15.5 PSI (Cross Pluck @0.2”/min) | 500% | Request Quote Request Sample |
|
| EA6062 | Semi Translucent | 30,550 cps | Polyurethane Acrylate - UV Curing | 6 MPa - ASTM D638 | 255% | Request Quote Request Sample |
