Deposit size is determined by a combination of fluid pressure, valve stroke, tip size and valve open time, with valve open time providing the greatest control over the amount of fluid
dispensed.
The TAD-200S controller is a fast, convenient way to adjust valve open time as small as 0.01 seconds, right at the dispensing station. The result is exceptional process control without time-consuming programming or mechanical adjustments that require the production line to be shut down. This controller is able to be used in both hand-held or semi-automatic and completely automatic dispensing systems.
Its vacuum picks-up pen makes this dispenser ideal for precise dispensing with the assembly of small components and repairing /reworking.
FEATURES:
- Two functions of dispensing and vacuum pick up are solved in one body.
- You transport the parts(work) with the vacuum pad while dispensing is operated.
- It’s ideal for assembly lines after bonding lens, glass, small-sized parts.
- You can adjust the range of vacuum according to the size or weight of the product.
- The vacuum pad is selectable among the below sizes.
Applied materials:
- Silicone, UV resin, Cream solder, Silver paste, Epoxy, Bond etc.
SPECIFICATION
| Model | TAD-200SP |
| Control method | Electronic / Pneumatic system |
| Time range | 0.01~99.99sec |
| Interval timer | 0.01~3.99sec |
| Dispensing time | 0~-350mmHg |
| Out signal | Open connector, DC24V, 20mmsec(Relay) |
| Power source | AC220V 50/60Hz(AC100V 50/60Hz: Option) |
| Power consumption | 32W |
| External Dimension and Weight | 282(W) X 186(D) X 81(H)mm, 3.0Kg |