The BlueWave® 200 version 3.0 is a high-intensity, light-curing spot-lamp system. This unit emits energy in the UVA and visible portion of the spectrum (300-450 nm) for light curing of adhesives, coatings, and encapsulants. Ideally suited for either manual or automated processes, the system contains an integral shutter which can be actuated by a foot pedal or PLC and a universal power input that provides consistent performance at any voltage. A wide range of light guides in various materials and configurations are available for use with this spot-curing unit, providing application flexibility.
The BlueWave® 200’s faceplate design has an operator interface with an easy-to-read LCD display and patented intensity adjustment control. The control is important for validating an appropriate intensity range and maintaining that range during production. Intensity measurement is easily accomplished with the Dymax ACCU-CAL™ 50 radiometer. Scheduled intensity measurements taken during the production process will indicate whether additional intensity adjustments are required.
FEATURES:
- Patented intensity adjustment feature
- >17,000 mW/cm2 initial intensity
- Simple to operate and adjust
- Easy-to-read, lighted front panel LCD display with enhanced unit status and notification displays
- Improved user interface for easier operation
- Up to 2,000 hours useful bulb life
- Wide range of liquid/fiber, single/multi-pole lightguides available
- Foot pedal or PLC integration
- Extended exposure time settings to 9,999.9 seconds
- Controlled power-up sequence ensures proper temperature
- Integral shutter with digital timer
- Fast bulb replacement
- Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation
- Smooth front panel surface that is easier to clean
| Initial Intensities | 280 – 450 40+ W/m² 450nm |
| Intensity Adjustment | Manual from 1% to 100% output |
| Power Requirement | 100-240 VAC, 50-60 Hz, 2.5 Amps |
| Power Supplies | Solid-State, 200W |
| Bulb | 200W metal-halide bulb included; replacement in less than one minute |
| Reflector | Elliptical; glass with dichroic coating to reflect UV and minimize IR |
| Shutter Timer | Digital LCD timer up to 9,999.9 seconds; manual or timer shutter |
| Shutter Activation | Foot pedal or PLC |
| I/O Port | 15 pin D – sub-miniature connector |
| Signals (PLC Integration) |
Inputs: Shutter activate, shutter deactivate, lamp control, PLC enable Outputs: Unit status, temperature fault, shutter faults, lamp status, power status, lightguide status, bulb life warning |