Born2BondTM Repair is a patented, gap-filling, instant adhesive and repair product with excellent adhesion to a very broad range of materials and surfaces. Repair is ideal for instant bonding and repairing, because it combines the strength of a structural adhesive with the speed of an instant adhesives. A tough polymer is achieved within a hardening time of under 10 minutes and the gel consistency enables application in any orientation.
FEATURES
Fixture time in 60 seconds*
Hardens in 5-10 minutes*
Instant adhesion with high bonding strength
Low volume shrinkage : 3 %
Fills gaps of any volume
Bonds a large range of materials**
Machinable once hardened
Sandable
Paintable
Impact resistant
Gel consistency for precise application
Non sagging for vertical applications
APPLICATIONS
Typical applications for this product are aftermarket (side mirrors, bumpers, spoiler aprons) repairs, wood repair and reconstruction, rubber door bonding, automotive joint bonding.
PRODUCT CHARACTERISTICS
Base Technology – Part A/B
Ethyl Cyanoacrylate (A)
Plasticizer (B
Components 1k – 2k
2k
Mix Ratio
4:1
Appearance/Color
Whitish
Gap Filling Capacity
Centimeters/Inches
Temperature Use Range
-40°C to 80°C (-40°F to 176°F)
Open Time
4 – 10 mins
Mixer Life
5 – 10 mins
VOC Content – Part A
92 g/L (ISO 11890-2)
VOC Content – Part B
15 g/L (ISO 11890-2)
UNCURED PHYSICAL PROPERTIES
Viscosity at 25°C (77°F)*
– Part A
120000 – 170000 cP @ 1.5 rpm
6000 – 9000 cP @ 50 rpm
Viscosity at 25°C (77°F)*
– Part B
70000 – 130000 cP @ 1.5 rpm
3000 – 7000 cP @ 50 rpm
Specific Gravity
23°C / 73.4°F)
1.12 g/mL (A) (ASTM D1875:
1.10 g/mL (B)
Refractive Index, ABBE
Opaque
CURED PHYSICAL PROPERTIES
Shore Hardness D (ISO 868-2003)
67
Soft Point – HDT (ASTM E2092-18a)
54°C (129.2°F)
Tensile Strength (ISO 527)
14 MPa
Elastic Modulus (ISO 527)
1100 MPa
Elongation at Break (ISO 527)
12%
Glass Transition Temperature
86°C (186.8°F)
Coefficient of Linear Thermal Expansion (ISO 10545-8)
