Bostik Super Glu Liquid is a single part, fast curing repair adhesive which bonds in seconds without the need for heat or hardener. It is extremely economical in use and provides very strong bonds of high tensile strength.
It can be used on a range of materials inside or outside the home including porcelain and rubber, as well as most common metals, jewellery and plastics.
FEATURES
Forms a strong bond in seconds.
Effective on a range of surfaces including china, metals and laminates.
Safety cap incorporated.
APPLICATION
Unscrew the nozzle and cap and remove the safetycollar. Replace the nozzle and cap and screw down to puncture the seal. Remove the cap and leave the
nozzle in place.
Very carefully apply a small amount of Bostik Super Glu Liquid to one surface only (typically apply one drop of adhesive for each 6cm2 of substrate to be bonded).
Bring the surfaces together and hold firmly for approximately 30 seconds. (Full strength is achieved in approximately 12 hours).
Replace the cap firmly after use, taking care not to leave Bostik Super Glu Liquid between the cap and the nozzle. Store upright. The tube is purposely only part full as the air above the adhesive stabilizes it. This air space in the tube reduces the chance of accidental spillages.
Application Temperature
+10°C to +35°C
Temperature Resistance
-20°C to +80°C. Will withstand temperatures up to +100°C for short periods.
Water Resistance
Good. After a few weeks the shear strength decreases gradually.
