Back to the useful information of Electronics Potting Application
Belows are optional ones, it is fine to leave blank if these conditions are not defined yet
What is the maximum operating temperature the potting material will experience in the application?
Maximum Operating Temperature is the peak temperature to which the cured material can be exposed during the operation of the end-device. Continuous operating temperature is usually lower than 230°C.
Which level of chemical resistance is required?
Chemical resistance means that the cured material withstands the exposure to typical industrial chemicals like Fuels, Diesel, Transmission Oil etc.
If the material must dissipate generated heat:
Thermal conductivity is the ability to transfer/dissipate heat.
Does the material have to be flame retardant?
Flame retardant materials are designed to make them resistant to catching fire. Testing according to UL 94 V0 is conducted.
Does the material need to cure at room temperature?
Ability to cure/crosslink the material at room temperature (+/- 25 °C) = No need to cure with elevated temperature.
Do you prefer a 1- or a 2-component material?
2-Component Materials: resin and hardener need to be mixed before use – Can be stored at room temperature and cured at room or elevated temperature.
1-Component Materials: resin and hardener are pre-mixed and ready to use – Cool storage and heat cure required.
Do you prefer a rather hard or rather soft material?
Hardness is a measure the deformation resistance of a material against an applied force.
We will reply as soon as possible (within 8 hours), if you are in urgent, please contact us through hotline: (+84) 984 695 398
