Product Introduction
Devcon® Brushable Ceramic Red is a low-viscosity, alumina-filled epoxy compound designed to protect surfaces from wear, abrasion, corrosion, and chemical attack. When applied as a 15-20 mil coating, this product creates a durable barrier ideal for sealing and protecting surfaces exposed to harsh environments.
Devcon® Brushable Ceramic Red Features:
- Temperature resistance up to 350°F (177°C)
- Available in Red, Blue, and White
- NSF-certified white formula for potable water applications
- Low-friction surface reduces turbulence, wear, and cavitation
- Outstanding chemical resistance to acids, solvents, and alkalis
- Open time: 40 minutes
- Gap fill: .0625″ – .075″
- Cure time: 16 hours
Devcon® Brushable Ceramic Red Applications:
- Protects pump casings, impeller blades, and gate valves
- Used for heat exchangers and other water-circulating equipment
- Serves as a top coat for repaired surfaces
- Protects equipment exposed to corrosion and erosion in industrial applications
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Typical Properties
| Property | Value | Units | Test Method/Condition |
|---|---|---|---|
| Cured 7 Days @ 75°F (24°C) | |||
| Adhesive Tensile Shear | 2,000 psi (13.8 MPa) | psi (MPa) | ASTM D1002 |
| Brush Coat Thickness | 0.254 - 0.58 | mm | |
| Coefficient of Thermal Expansion | 27.1 in/in/°F (49.5 cm/cm·°C) | in/in/°F (cm/cm·°C) | |
| Compressive Strength | 13,200 psi (91 MPa) | psi (MPa) | |
| Coverage (0.015 in / 0.38 mm) | 16.6 ft²/lb (1.56 m²/kg) | ft²/lb (m²/kg) | |
| Cured Hardness | 90 Shore D | Shore D | |
| Cured Shrinkage | 0.0020 in/in (0.0020 cm/cm) | in/in (cm/cm) | |
| Dielectric Constant | 3.87 @ 1 MHz | ASTM D150 | |
| Flexural Strength | 8,000 psi (55 MPa) | psi (MPa) | ASTM D790 |
| Salt Spray Resistance | > 1,000 hrs | hrs | |
| Solids by Volume | 100% | % | |
| Specific Volume | 16.5 in³/lb (0.596 cm³/g) | in³/lb (cm³/g) | |
| Temperature Resistance (Wet) | 302°F (150°C) | °F (°C) | |
| Temperature Resistance (Dry) | 350°F (177°C) | °F (°C) | |
| Uncured Properties @ 72°F (23°C) | |||
| Color | Blue or Red | ||
| Hard Dry | 6 hrs | hrs | |
| Mix Ratio by Volume | 3:4:1 | ||
| Mix Ratio by Weight | 5:6:1 | ||
| Mixed Viscosity | 20,000 cP | cP | |
| Pot Life | 40 min | min | |
| Recoat Time | 6 - 8 hrs | hrs | |
| Density | 12.77 lb/Gal (1.53 g/cm³) | lb/Gal (g/cm³) | |
| Standard Tests | |||
| Adhesive Tensile Shear | 2,000 psi (13.8 MPa) | psi (MPa) | ASTM D1002 |
| Compressive Strength | 13,200 psi (91 MPa) | psi (MPa) | ASTM D695 |
| CTE | 27.1 in/in/°F (49.5 cm/cm·°C) | in/in/°F (cm/cm·°C) | ASTM D696 |
| Cure Shrinkage | 0.0020 in/in (0.0020 cm/cm) | in/in (cm/cm) | ASTM D2566 |
| Dielectric Constant | 3.87 @ 1 MHz | ASTM D150 | |
| Flexural Strength | 8,000 psi (55 MPa) | psi (MPa) | ASTM D790 |
| Hardness | 90 Shore D | Shore D | ASTM D2240 |
