Product Introduction
Devcon® Carbide Putty is a silicon carbide-filled epoxy putty designed to provide exceptional wear and abrasion resistance. Ideal for applications involving small particulates, this putty offers excellent protection in aggressive industrial environments, making it perfect for pipe elbows, pulverizers, slurry lines, and exhaust fans.
Devcon® Carbide Putty Features:
- Silicon carbide-filled for enhanced wear resistance
- Non-sagging and extremely wear-resistant
- Room temperature cure for convenience
- Handles particulate less than 1/16″ (1.6mm)
- Withstands continuous service temperatures up to 250°F
- Open time: 50 minutes
- Gap fill: 0.25″ – 1.5″+
Devcon® Carbide Putty Applications:
- Pipe elbows
- Pulverizers
- Slurry lines
- Cyclones
- Exhaust fans
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Typical Properties
| Property | Typical Value | Units | Test Method |
|---|---|---|---|
| Cured 7 Days @ 75°F (24°C) | |||
| Adhesive Tensile Shear | 1,350 psi (9.3 MPa) | psi (MPa) | ASTM D1002 |
| Coefficient of Thermal Expansion | 14 in/in/°F (25.2 cm/cm·°C) | in/in/°F (cm/cm·°C) | ASTM D696 |
| Compressive Strength | 8,160 psi (56.3 MPa) | psi (MPa) | ASTM D695 |
| Cured Shrinkage | 0.0009 in/in (0.0009 cm/cm) | in/in (cm/cm) | ASTM D2566 |
| Dielectric Constant | 25 | ASTM D150 | |
| Flexural Strength | 5,480 psi (37.8 MPa) | psi (MPa) | ASTM D790 |
| Hardness | 85 Shore D | Shore D | ASTM D2240 |
| Solids by Volume | 100% | % | |
| Temperature Resistance | Wet: 120°F (49°C), Dry: 250°F (121°C) | °F (°C) | |
| Tensile Strength | 2,640 psi (18.2 MPa) | psi (MPa) | ASTM D638 |
| Uncured Properties @ 72°F (23°C) | |||
| Color | Grey | ||
| Coverage (1/4" / 6.35mm) | 64 in²/lb (910 cm²/kg) | in²/lb (cm²/kg) | |
| Functional Cure | 16 hrs | hrs | |
| Mix Ratio by Volume | 4:1 | ||
| Mix Ratio by Weight | 8:1 | ||
| Mixed Viscosity | Putty | ||
| Pot Life | 16 hrs | hrs | |
| Recoat Time | 3-6 hrs | hrs | |
| Specific Gravity | 1.46 lb/gal (1.75 g/cm³) | lb/gal (g/cm³) | |
| Volume | 15.9 in³/lb (0.574 cm³/g) | in³/lb (cm³/g) |
