Product Introduction
Devcon® Epoxy Plus 25 is a rubber-toughened, high viscosity structural adhesive offering superior impact, peel, and fatigue resistance. It is perfect for bonding metals, rigid plastics, concrete, glass, and wood. With a 25-minute working time, it is ideal for potting and encapsulating electronic components.
Devcon® Epoxy Plus 25 Features
- 25-minute working time.
- Bonds metals, FRP composites, rigid plastics, concrete, glass, and wood.
- Non-corrosive.
- Ideal for potting and encapsulating electronic components.
- Gap fill range: 0.01″ – 0.05″.
- Color: Grey.
- Mix Ratio: 1:1.
Devcon® Epoxy Plus 25 Applications
- Used for furniture, jewelry, and appliance repairs.
- Ideal for bonding metals, thermoset plastics, and structural parts.
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Typical Properties
Product Data
Cured 7 Days @ 75°F (24°C)
| Property | Value | Standard Tests |
|---|---|---|
| Adhesive Lap Shear (GBS) | 2,750 psi (19 MPa) | Tensile Lap Shear ASTM D1002 |
| Dielectric Strength | 550 volts/mil (21.65 kV/mm) | Dielectric Strength ASTM D149 |
| Gap Fill | 1/4" (6.35 mm) | |
| Shore Hardness | 74 Shore D | ASTM D2240 |
| Impact Resistance | 10 ft-lb/in² (21 kJ/m²) | T-Peel ASTM D1876 |
| Service Temperature | -40°F to 200°F (-40°C to 93°C) | |
| Solids by Volume | 100% | |
| Specific Volume | 23.2 in³/lb (0.838 cm³/g) | |
| Tensile Elongation | 20% | |
| T-Peel | 20-25 pli (3.5-4.4 N/mm) |
Uncured Properties @ 72°F (23°C)
| Property | Value |
|---|---|
| Color | Grey |
| Working Time | 25 minutes |
| Fixture Time | 2 hours |
| Functional Cure | 3.5 hours |
| Full Cure | 24 hours |
| Mix Ratio by Volume | 1:1 |
| Mix Ratio by Weight | 1.32:1 |
| Mixed Density | 9.5 lb/gal (1.14 g/cm³) |
| Mixed Viscosity | 70,000 cP |
