Home > Products > By Application > Adhesives > UV Adhesives > PSA LOCA 3000 UV/Visible Light Cure Adhesive

PSA LOCA 3000 UV/Visible Light Cure Adhesive

  • Product code:
  • Manufacturer:
  • Package size:
  • Shelf Life:
Request Quote Request Sample

Devcon® Tru-BondTM PSA LOCA products provide a unique patent pending chemistry engineered to bond the glass cover lens to a touch panel sensors and touch panel assemblies to the LCD or OLED module. The product is applied as a liquid and cured using a single exposure step to form a fully polymerized pressure-sensitive adhesive (PSA). 

This single light exposure design delivers consistent strengths under the inked glass areas and through to the clear lens portions of the assembly. The Devcon® Tru-Bond™ PSA LOCA product line can bond to a wide range of materials including glass, PMMA, ABS, PP, PE, PC and many more surfaces.

PHYSICAL PROPERTIES (uncured)  
Chemical Class Acrylic
Appearance (uncured) Clear Liquid
Components Single-Requires no Mixing
Viscosity (@25°C) 3,000 cps (Brookfield RV Spindle 2, 6 rpm)
Specific gravity (@25°C) 1.03

 

PHYSICAL PROPERTIES (cured)  
Curing condition LED365 lamp, illumination intensity=100 mW/cm2, total energy=5,000 mJ/cm2
Shore hardness, ASTM D2240 45oo
Specific gravity (@25°C) 1.03
Volume shrinkage, % 3.68
Refractive Index (@25°C, ISO 489) 1.49
Tg, °C -41
Elongation, ASTM D638, % 800
Tensile strength, ASTM D638, MPa 0.20
Dielectric constant (@100kHz) 4.0
Storage modulus (@25°C, KPa) 37

TDS:Download

Get MSDS

    Please leave your information and we'll get back to you shortly!







    How to bond Hard-to-bond Substrates (Nylon, COC/COP and PEBA) in Medical Devices Assembly? 
    https://prostech.ph/how-to-bond-hard-to-bond-substrates-nylon-coc-cop-and-peba-in-medical-devices-assembly/

    Understanding the Low Surface Energy (LSE) MaterialsNylon in Medical Devices AssemblyCOC/COP (Cyclic Olefin Polymers and Copolymers) in Medical Devices AssemblyBonding
    FIPG & CIPG – A Comprehensive Guide
    https://prostech.ph/fipg-cipg-a-comprehensive-guide/

    1. Overview of Gasket – FIPG and CIPG 2. Key Features and Applications of Each Type1. FIPG – FORMED IN PLACE
    The differences between Silicone-based and Non-silicone Thermal Interface Materials (TIMs)?
    https://prostech.ph/the-differences-between-silicone-based-and-non-silicone-thermal-interface-materials-tims/

    1. Thermal interface materials – TIMs2. Silicone-based or Non-silicone TIMs2.1. Silicone-based thermal interface materials 2.2. Non-silicone thermal interface materials 3. Conclusion In
    tesa® 4928
    https://prostech.ph/tesa-4928/

    tesa® 4928 is a transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive. Features An