Konform LED CTLED-P is specifically designed and formulated for light-emitting diode applications, where a completely transparent silicone coating is required to provide a tough, protective coating. Konform LED CTLED-P provides maximum flexibility for extreme temperatures on the flex and rigid circuitry found on LED displays. Cured coatings are hydrolytically stable and retain their physical electrical properties after high temperature and humidity exposure. Konform LED will not stress delicate circuit components and meets the performance parameters (without UV traceability) of MIL-I-46058C, Type SR.
FEATURES:
- Silicone coating transparent to visible wavelengths, will not block or change light intensity or wavelength
- Extends component life by protecting against adverse environments
- Good insulation properties helps with circuit insulation characteristics, excellent flexibility minimizes thermal stress
- Resists moisture, salt, fungus, corrosive vapors, and severe environments
- Engineered to withstand the heat generated by electronic circuitry as well as climatic temperature extremes
- Compliant to IPC-CC-830
- Room temperature cure
- RoHS compliant
TYPICAL APPLICATIONS:
Konform LED CTLED-P is ideal for applications in:
- LED Displays and controls
- Data Communications
- Instrumentation
- Automotive Manufacturing
- Marine Manufacturing
- Process Control
Usable Temp. Range of Cured Coatings |
(-85°F to 390°F) -65°C to 200°C) |
Tack Free Time | 15 min |
Curing Conditions: Full Cure (@ 80% R.H.) |
24 Hours @ 77°F (25°C) 8 Hours @ 170° (77°C) |
Specific Gravity (Water=1) @ 68°F | 0.93 |
Viscosity (cps @ 77°F) | 65 ± 5 cps |
Flash Point (TCC) | 53°F |
Volume Resistivity (ohm/cm) | 1.5 x 1016 |
Dielectric Breakdown (volts/mil) | 1100 |
Thermal Conductivity (Cal-cm/sec-cm2-ºC) | 2.9 x 10-4 |
Coefficient of Thermal Expansion (in/in/°C) | 2.1 x 10-4 |
Shelflife | 1 year from production date after opening |
VOC* Content: CARB SCAQMD Federal |
56.3% 570 g/L 56.3% |
RoHS Compliant |