- TM2000 is German-made hot melt hand gun, suitable for manual dispensing and potting.
- TM2000 is Special design for R&D use,also suitable for small quantity production.
- High efficiency and stable melting rate for continuously use.
- Appropriate pressure range for low pressure molding:1.5 – 5 bar.
- Precision temperature control ±1℃, to avoid the use and production of data error.
Item | Specification |
Total Weight | 8.8 kg |
Hot-Melt Gun Weight | 1.6 kg |
Supply Unit Weight | 7.2 kg |
Melt Accumulator Capacity | 200 ml |
Power Supply Voltage | 230 Volts,50 Hz (schuko) |
Wattage | 350 Watts |
Operation Temperature | 50℃ to 240℃ infinitely adjustable |
Temperature Control | Electronic |
Constancy of Temperature | ± 1℃ |
Temperature Display | Digital LED Display |
Overheating Protection | Limiting thermostat (max. 260℃) |
Warm-Up Time | ca.10 min |
Conveying System | Compressed air |
Compressed Air Connection | Through hose with plug-in connector (max. excess pressure 8 bar (116 psi)) |
Operating Pressure on Hand-held Unit | 1.5 to 5 bar(21.75 to 72.5 psi),infinitely adjustable |
Excess pressure Protection | Safety valve on pressure control |
Air Consumption | Triggering pressure 5.5 bar(79.75 psi) |
Length of Electrical Cord | ca.1 / Release max. |
Length of Compressed Air Cord | 2.75 m |
Length of Hot-Melt Gun Supply Cord | 3.00 m |
Length of Supply Cord | 2.75 m |