RTV511 silicone rubber compound is low-temperature two-part silicone elastomers. They are supplied ready to use with a base compound and DBT (dibutyl tin dilaurate) as the standard curing agent. DBT is suitable for most applications, however, other catalysts are available to facilitate deep section cure, faster cure, and automated mixing. RTV511 has the widest useful temperature (highest and lowest) of any silicone elastomer
FEATURES:
Variable work times and cure rates by adjusting the amount and type of curing agent
Room temperature cure
Composition free of solvents and solvent odor
Excellent adhesion capabilities with primer
Excellent release properties
Retention of elastomeric properties with the following temperature ranges:
RTV511 at temperatures from -115°C (-175°F) up to 204°C (400°F) continuously and up to 260°C (500°F) for short periods of time
APPLICATIONS:
Cast in place heat shielding
Adhesion of thermal blankets
Protective coatings and thermal insulation for sensitive components and critical equipment
Encapsulants & potting for high heat locations
Interior & exterior adhesives
Flexible composite coatings
Color
White
Consistency
Pourable
Viscosity, cps
16,000
Specific Gravity
1.21
Work Time @ 25°C (77°F), hours
1.5
Cure Time @ 25°C (77°F), hours
24
Hardness, Shore A Durometer
42
Tensile Strength, kg/cm2
(psi)
27 (380)
Elongation, %
170
Tear Strength, kg/cm (lb/in)
3.8 (31)
Thermal Conductivity, W/mK
0.26
Coefficient of Linear Thermal
Expansion, cm/cm, °C
