The Mxbon 21382 is α-cyanoacrylate adhesive, and it is specially formulated for electronics applications with high viscosity. It will highly polymerize with moisture in the air for a fast cure and meet the highest industrial standards.
Mxbon 21382 product does not contain solvent and use in demanding applications where exceptional performance characteristics are required. They include resistance to most types of environmental exposures, moderate heat, aging and many different chemicals, as well as high strength and fatigue resistance.
Mxbon 21382 is a single component system and does not require heat, mixing, clamps and the use of a catalyst. When a thin layer of Mxbon 21382 applied between two surfaces comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond strength. It is attractive not only technically but economically.
FEATURES:
- Suitable for gap filling up to 0.2mm
- Withstand temperature up to 100C
- Excellent adhesion to most substrates
- Suitable for accelerator of MXBON 2001G/L
- Viscosity: 3,500 ~ 8,500 cps
APPLICATIONS:
- Industrial motors
- Automobile engine lids
- Waterproof strips, filters, heaters, ovens and horns
- Can be applie to elements such as disk drivers, high-speed motors and circuit boards in the electrical industry.
Base |
Ethyl 2-Cyanoacrylate |
Appearance (uncured) |
Transparent, colorless to yellowish colored liquid |
Components |
Single part – requires no mixing or |
Specific Gravity @ 25℃ |
1.05 |
Cure | Moisture |
Viscosity @25℃ mPa. s (cP) | 3500 ~ 8500 |
Service temperature |
-54~100℃ (-65~212℉) |
Full cure (hrs) |
24 |