MXBON® 22443 is an odorless light-curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixtures, fillet cure or surface cure. The UV and visible light cure properties facilitated the rapid curing of the exposed surface area and make it a unique product in the world of light-curing adhesive.
Medium viscosity, light-curing cyanoacrylate. Combines the light-curing mechanism & cyanoacrylate technology, allowing the glue to be cured instantly when exposed to UV light. This dual curing mechanism is ideal for application where “Cure on demand” is required. This glue will also cure by itself without UV light. The medium viscosity allows better control of the glue to create better performance.
FEATURES:
- Transparent, slight green color
- Rapid fixture
- Cure with UV light and/or moisture
- Gap filling capacity
- Certified ISO 10993-5, used in Medical Industry
- Viscosity: 150~300cps
Technology |
Cyanoacrylate / UV / Visible |
Chemistry |
Alkoxyethyl Cyanoacrylate with photoinitiator |
Appearance |
Transparent, yellow liquid |
Components | One-part requires no mixing |
Vícosity | Low |
Cure | UV light |
Secondary Cure | Humidity |
Chemical/Solvent Resistance | Excellence |
Heat Aging | See more in TD |
TYPICAL PROPERTIES OF UNCURED MATERIAL
Typical Value | |
Specific Gravity @ 25 ℃, g/cm³ |
1.13 |
Viscosity @ 25 ℃, mPa·s |
150 – 300 |
TYPICAL CURING PERFORMANCE
Tack Free Time | in seconds |
UV/Visible Light Sources | Electrodeless, V bulb: 70 mW/cm2, measured @ 365 nm: < 10 s |
Visible Light Sources | Blue light laser: 70 mW/cm2, measured @ 445 nm: < 10 s |
TYPICAL CURED PERFORMANCE’s Tensile Shear Strength
Strength (N/mm2) |
Strength (N/mm2) |
|
ABS | 12.7 | 7.3 |
Acrylic | 6.6 | 8.3 |
Polycarbonate | 11.9 | 6.2 |
PVC | 6.5 | 3.6 |