PERMABOND 200 is a high viscosity product with good flow control useful in wire tacking applications or bonding components. It is fast setting and suitable for use on plastics, rubber and metals.
FEATURES:
- Fast setting and fixturing of parts
- Rapid development of high strength
- Ease of use-no mixing, no heat cure
- Bonds most materials
- 100% reactive, no solvents
APPLICATIONS:
- Use on plastics, rubber and metals
Physical Properties of Uncured Adhesive
Chemical composition | Ethyl cyanoacrylate |
Appearance | Colourless |
Viscosity @ 25°C | 1500 |
Specific gravity | 1.05 |
Typical Curing Properties
Maximum gap fill | 0.015 (0.38) |
Fixture / handling time* (0.3 N/mm² shear strength is achieved) | 15 seconds (Steel) 15 seconds (Buna N Rubber) 15 seconds (Phenolic) |
Full strength | 24 hours |
Typical Performance of Cured Adhesive
Shear strength (ISO4587) |
Grit blasted steel 3200 (22) Aluminum 1200 (8.3) |
Impact strength (ASTM D-950) | 3-7 kJ/m² (1.4-2.4 ft-lb/in² |
Dielectric constant @10kHz | 2.5 |