PERMABOND® 799 Cyanoacrylate
PERMABOND® 799 is a high-viscosity cyanoacrylate designed for fast curing and bonding across wide gaps or porous materials. Its rapid cure reduces frosting and fogging, making it suitable for applications involving plastics, metals, ceramics, and elastomers.
PERMABOND® 799 Features:
- Extremely fast setting
- High strength bonding
- Surface insensitive for porous substrates
- No mixing or heat cure required
- 100% reactive, solvent-free formula
PERMABOND® 799 Applications:
- Bonding porous materials like wood or foam
- Large gap bonding in structural assemblies
- Plastic, ceramic, or metal component assembly
- Production lines where minimal fogging is essential
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Physical Properties of Uncured Adhesive
|
Chemical composition |
Ethyl cyanoacrylate |
|
Appearance |
Colourless |
|
Viscosity @ 25°C |
5000 mPa.s (cP) |
|
Specific gravity |
1.1 |
Typical Curing Properties
|
Maximum gap fill |
0.5 mm 0.02 in |
|
Fixture / handling time* (0.3 N/mm² shear strength is achieved) |
8 seconds (Steel) 8 seconds (Buna N Rubber) 8 seconds (Phenolic) |
|
Full strength |
24 hours |
Typical Performance of Cured Adhesive
|
Shear strength* (ISO4587) |
Steel 20-22 N/mm² (2900-3200 psi) ABS 8 N/mm² (1160 psi)** PVC >10 N/mm² (>1450 psi)** Polycarbonate 10 N/mm² (1450 psi)** |
|
Impact strength (ASTM D-950) |
3-5 kJ/m² (1.4-2.4 ft-lb/in²) |
|
Dielectric constant @10kHz |
2.5 |
|
Dielectric strength |
25 kV/mm |
|
Coefficient of thermal expansion |
90 x 10-6 mm/mm/°C |
|
Coefficient of thermal conductivity |
0.1 W/(m.K) |
|
Hardness (ISO868) |
85 Shore D |
