PERMABOND® 802 Cyanoacrylate
PERMABOND® 802 is a fast-setting, low-viscosity ethyl cyanoacrylate suitable for applications where high temperature resistance and rapid assembly are required. It bonds metals, plastics, and rubber effectively, making it ideal for automated production lines.
PERMABOND® 802 Features:
- High temperature resistance
- Rapid curing at room temperature
- No mixing or heating required
- 100% reactive, solvent-free formulation
PERMABOND® 802 Applications:
- Bonding metal and rubber in industrial use
- High-speed manufacturing lines
- Plastic component assembly
- Applications requiring elevated thermal stability
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Physical Properties of Uncured Adhesive
|
Chemical composition |
Ethyl cyanoacrylate |
|
Appearance |
Colourless |
|
Viscosity @ 25°C |
90-110 mPa.s (cP) |
|
Specific gravity |
1.1 |
Typical Curing Properties
|
Maximum gap fill |
0.15 mm 0.006 in |
|
Fixture / handling time* (0.3 N/mm² shear strength is achieved) |
10-15 seconds (Steel) 10-15 seconds (Buna N Rubber) 10-15 seconds (Phenolic) |
|
Full strength |
24 hours |
Typical Performance of Cured Adhesive
|
Shear strength** (ISO4587) |
Steel 19-23 N/mm² (2800-3300 psi) ABS >6 N/mm² (>870 psi)* PVC >5 N/mm² (>725 psi)* Polycarbonate 6 N/mm² (870 psi) |
|
Coefficient of thermal expansion |
90 x 10-6 mm/mm/°C |
|
Coefficient of thermal conductivity |
0.1 W/(m.K) |
|
Hardness (ISO868) |
85 Shore D |
|
Dielectric Strength |
25kV/mm |
