PERMABOND 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.
FEATURES:
Excellent adhesion to metal surfaces
Fast cure
Easy to apply and dispense
No mixing required
Approved to MIL-A-46050C Type I Class 2 (existing designs)
CID A-A-3097 Type I Class 2 (new designs)
APPLICATIONS:
Filter Bonding
Rubber gasket bonding onto filters
Wire Tacking
Bonding Copper Wire to Ceramic
Chemical composition
Methyl cyanoacrylate
Appearance
Colorless
Viscosity @ 25°C
70-90 mPa.s (cP)
Specific gravity
1.1
Maximum gap fill
0.15 mm 0.006 in
Fixture/handling time
(0.3 N/mm² shear strength is achieved)