Product Introduction
Permabond® A126 is a high-strength anaerobic adhesive designed for the permanent assembly of coaxial assemblies or threaded metal components. Its exceptionally low viscosity makes it ideal for tight-fitting components or where adhesive application is needed post-assembly. Additionally, it can seal porosity in welds or castings.
PERMABOND® A126 Features
- Vibration resistant
- Can be applied post-assembly
- Improved fatigue life
- Seals porosity in welds and castings
PERMABOND® A126 Applications
- Coaxial assembly bonding
- Tight-fitting component sealing
- Sealing porosity in welds and castings
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Physical Properties of Uncured Adhesive
|
Chemical composition |
Acrylic |
|
Appearance |
Green |
|
Viscosity @ 25°C |
10-30 mPa.s (cP) |
|
Specific Gravity |
1.0 |
|
UV fluorescence |
Yes |
Typical Curing Properties
|
Maximum gap fill Maximum thread size |
0.05 mm 0.001 in M10 ½" |
|
Time taken to reach handling strength (M10 steel) @23°C |
15 minutes* |
|
Time taken to reach working strength (M10 steel) @23°C |
1 hour |
|
Full strength (M10 steel) @23°C |
24 hours |
Typical Performance of Cured Adhesive
|
Torque strength (M10 steel ISO10964) |
Break 14 N·m 125 in.lb Prevail 34 N·m 300 in.lb |
|
Shear strength (steel collar & pin ISO10123) |
10-20 MPa 1450-2900 psi |
|
Coefficient of thermal expansion |
90 x 10-6 mm/mm/°C |
|
Dielectric strength |
11 kV/mm |
|
Thermal conductivity |
0.19 W/(m.K) |
