Permabond® A136 is an anaerobic material designed for making ‘formed in situ’ gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets thereby offering potential for reduced stock holdings. By allowing surface to surface contact, load transmission can be improved. As the product does not shrink, creep or relax after curing, no bolt re-tightening is required. Its excellent chemical resistance allows its use with a wide variety of gases and liquids.
FEATURES:
- Rubber toughening – ideal for sealing between dissimilar metals. Good impact and vibration resistance.
- Seals between metal faces/flanges (up to 0.5mm gap) and bolt holes.
- Replaces conventional paper/cork / rubber or silicone gaskets.
- Makes all sizes/shapes of gasket with one product (no need to hold the specific pre-cut gasket in stock).
- Will not deteriorate over time – no need to replace / service, no risk of loose particles damaging valves, etc.
- It does not require tightening after “bedding-in”, unlike conventional gaskets.
- It can be removed if necessary.
- Easy to apply, rapid cure speed.
- Excellent resistance to water, chemicals and automotive fluids (fuel, oil, brake fluid, antifreeze, etc.).
- Approved for contact with drinking water.
APPLICATIONS:
- Applied where corrosion prevention needed
| Thành phần hóa học | Acrylic |
| Dạng | Red |
| Độ nhớt @ 25°C | 2rpm: 75,000 mPa.s (cP) |
| Trọng lượng riêng | 1.1 |
| Khả năng phản quang UV | Yes |
| Đường kính gap tối đa | 0.5 mm (0.02 in) |
Thời gian khô bề mặt (M10 steel) @23°C | <30 minutes |
Thời gian khô tack-free (M10 steel) @23°C | 2 hours |
Thời gian khô hoàn toàn (M10 steel) @23°C | 24 hours |
