Permabond® HH190 Gasketmaker is an anaerobic curing flange sealant that can replace, or be used as a dressing for, conventional pre-cut gaskets. Since HH190 is a flowable paste, it conforms to the shape of the flange. The consistency allows metal-to-metal contact of the flanges while filling the areas where no contact exists because of irregularities. HH190 results in uniform stress distribution and eliminates the need for retorquing because of stress relaxation of the flange bolts. It provides instant seal depending on the gap and flange width and ultimately seals up to 5000psi. It has excellent shock and vibration resistance and is able to be conveniently dismantled if necessary.

FEATURES:

Eliminates pre-cut gaskets from flange assemblies
Instant pressure seal
Forms a tough, durable seal able to withstand high pressure
No need to re-tighten flange bolts
Non-flammable
No shimming effects – better load transmission

Typical Properties

Product code: HH190
Manufacturer: Permabond
Package size: 50ml
Shelf Life: 12 months

Torque strength (M10 steel ISO10964)	Break 10 N·m 90 in.lb Prevail 6 N·m 50 in.lb
Shear strength (steel collar & pin ISO10123)	6 MPa 900 psi
Coefficient of thermal expansion	90 x 10-6 mm/mm/°C
Dielectric strength	11 kV/mm
Thermal conductivity	0.19 W/(m.K)
Instant seal (5 mil gap)	>75 psi
Full seal (10 mil gap)	>5000 psi

Resources

TDS:Download

Form in Place and Cure in Place Gaskets

https://prostech.ph/form-in-place-and-cure-in-place-gaskets/

What is Foam-in-Place Gasketing and Sealing?What Benefits Does Foam-in-Place Gasketing and Sealing Offer?What Factors Need to Be Considered When Choosing