Product Introduction
Permabond® HL126 is a water-thin threadlocker designed to lock pre-assembled parts through wicking action. It is also ideal for sealing weld porosity, with the uncured material penetrating micro pores before curing, providing reliable fast curing on metallic surfaces.
PERMABOND® HL126 Features
- Prevents vibration loosening
- Controlled off-torque
- Full cure at room temperature
- Can be applied post-assembly
- Ideal for sealing weld porosity
- Superior environmental resistance
- Environmentally friendly – 100% solids
PERMABOND® HL126 Applications
- Locking pre-assembled parts
- Sealing weld porosity
- Vibration-resistant applications
- Sealing metallic surfaces
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
Physical Properties of Uncured Adhesive
|
Chemical composition |
Methacrylate esters |
|
Appearance |
Green |
|
Viscosity @ 25°C |
10 - 30 mPa.s (cP) |
|
Specific Gravity |
1.0 |
Typical Curing Properties
|
Maximum gap fill Maximum thread size |
0.05 mm 0.001 in M10 ½" |
|
Time taken to reach handling strength (M10 steel) @23°C |
15 minutes* |
|
Full strength (M10 steel) @23°C |
24 hours |
Typical Performance of Cured Adhesive
|
Torque strength (M10 steel ISO10964) |
Break 14 N·m 125 in.lb Prevail 34 N·m 300 in.lb |
|
Shear strength (steel collar & pin ISO10123) |
10-20 MPa (1450- 2900 psi) |
|
Coefficient of thermal expansion |
90 x 10-6 mm/mm/°C |
|
Dielectric strength |
11 kV/mm |
|
Thermal conductivity |
0.19 W/(m.K) |
