PERMABOND® UV6361 is a UV-curing adhesive developed for use on plastics. It has good adhesion to PET and contains a long-wavelength photo initiator to allow it to cure through UV-stabilised plastics. This adhesive can also be used to bond glass, metals and other materials. UV6361 cures to give a colourless bond so is ideal for applications where aesthetic appearance is vitally important.
FEATURES:
- Cure on demand
- Ideal for bonding PET and recycled PET
- 100% solids, no solvents
Typical Properties
Physical Properties of Uncured Adhesive
| Chemical composition | Urethane methacrylate |
| Appearance | Colourless, clear |
| Viscosity @ 25°C | 4,000-6,000 mPa.s (cP) thixo |
| Specific gravity | 1.1 |
Typical Curing Properties
| Typical fixture time (PET) | Low power 4mW/cm² battery lamp: <5 secs LED 100mW/cm² lamp:<2 secs UV light guide 30W/cm²:<1 secs |
| Cure wavelength | 365 – 420 nm |
Typical Performance of Cured Adhesive
| Overlap shear strength (ISO4587) | PET: >5 N/mm² (>725 psi) Substrate stretching |
| Tensile strength (DIN53504) | 3-5 N/mm² (435-725 psi) |
| Refractive index | > 1.48 |
| Elongation at break (DIN53504) | 120-150% |
| Hardness (ISO868) | 30 Shore D |
