SAF30 45 SA
Bostik SAF30 45 SA is a two-component methyl methacrylate adhesive offering robust chemical, mechanical, and fatigue resistance. It is suitable for bonding dissimilar materials and features a medium open time with rapid cure and minimal surface preparation.
SAF30 45 SA Features:
- Medium open and fixture time (cures in ~45 minutes)
- Non-sagging for vertical surfaces
- Strong resistance to environmental factors
SAF30 45 SA Applications:
- Structural bonding of composites, metals, and plastics
- Applied at 18–28°C with no post-curing required
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
RANGE OF APPLICATION
METALS | COMPOSITES | PLASTICS |
Steel | Polyester | PVC |
Stainless Steel | Vinyl ester | PS |
Aluminum | Epoxy | ABS |
| Acrylic (Elium) | PC |
|
| PMMA |
PRODUCT CHARACTERISTICS
CURING PROPERTIES | |
Properties | Result |
System | Two-component 10:1 volume ratio |
Polymerization | Room temperature |
TYPICAL PHYSICAL PROPERTIES | ||
Properties | Resin | Hardener Bostik SAF D |
Appearance | Off-White | White |
Density (+/_ 0.02) | 1.09 | 1.16 |
Viscosity @77°F (23°C) | 350,000 - 550,0001 | 50,000 - 180,0002 |
Type | Non-sag | |
CURING PROPERTIES | |
Properties | Result |
Open time [min] | 20 - 25 |
Fixture time @77°F (23°C) [min] | 30 - 60 |
Full cure [hours] | 24 |
MECHANICAL PROPERTIES | |
Properties | Result |
Lap shear strength [MPa/psi]3 thickness 250μm | 16 - 18 / 2,320 - 2,611 CF5 |
Tensile strength at break [MPa/psi]3 | 11 - 13 / 1,595 - 1,885 |
Tensile modulus [MPa/psi]3 | 600 - 800 / 87,023 - 116,030 |
Hardness [Shore D] | 70 - 80 |
Elongation at break4 | 20% - 30% |
WEATHERING AND AGING RESISTANCE
LAP SHEAR STRENGTH (MPa/psi)3 THICKNESS 250μm | |||
Substrates | Before aging cycles | After aging cycles D3 | After aging cycles CH7 |
Aluminum 6060 | 17 / 2,465 CF5 | 16 / 2,320 CF | 10 / 1,450 CF |
Stainless steel | 18 / 2,610 CF | 16 / 2,320 CF | 10 / 1,450 CF |
FPR | DF7 | DF | DF |
