Prostech Philippines

SILCOOL TIA0260 is a one-component silicone adhesive that cures on exposure to atmospheric moisture at room temperatures to form a thermally conductive silicone rubber. The product offers corrosion-free adhesion to metals, including copper, plastics, ceramics, glass, etc. without the use of primers.

Key Features

High thermal conductivity
Low volatility: reduced low molecular siloxane content
Non-corrosive to metals (including copper)
One-component, fast alkoxy cure
Flame retardant (UL94 V-0, File No. E56745)

Applications

While the typical operating temperature for silicone materials ranges from -45℃ to 200℃, the long-term maintenance of its initial properties is dependent upon design related stress considerations, substrate materials, frequency of thermal cycles, and other factors.

Property	Unit	Value
Uncured Properties
Appearance, Color		Semi-flowable, light gray paste
Viscosity	Pa•s	150
Tack free time (23 ºC)	min	10
Cured Properties (7 days at 23 ºC, 50% RH)
Thermal Conductivity	W/m•K	2.6
Thermal Resistance (BLT)	mm²•K/W	18 (50 μ m)
Density	g/cm³	3.01
Hardness (Type A)		90
Tensile Strength	MPa	4.8
Elongation	%	20
Adhesive Strength	MPa	3.0
Volume Reistivity	MΩ·cm	7.0 x 10⁶
Dielectric Strength	kV/mm	20
Low Volatile Siloxane (D₄ – D₁₀)	wt%	0.001

TDS:Download

Get MSDS

Please leave your information and we'll get back to you shortly!

*Country of Operation:

*City:

How to bond Hard-to-bond Substrates (Nylon, COC/COP and PEBA) in Medical Devices Assembly?

https://prostech.ph/how-to-bond-hard-to-bond-substrates-nylon-coc-cop-and-peba-in-medical-devices-assembly/

Understanding the Low Surface Energy (LSE) MaterialsNylon in Medical Devices AssemblyCOC/COP (Cyclic Olefin Polymers and Copolymers) in Medical Devices AssemblyBonding

FIPG & CIPG – A Comprehensive Guide

https://prostech.ph/fipg-cipg-a-comprehensive-guide/

1. Overview of Gasket – FIPG and CIPG 2. Key Features and Applications of Each Type1. FIPG – FORMED IN PLACE

The differences between Silicone-based and Non-silicone Thermal Interface Materials (TIMs)?

https://prostech.ph/the-differences-between-silicone-based-and-non-silicone-thermal-interface-materials-tims/

1. Thermal interface materials – TIMs2. Silicone-based or Non-silicone TIMs2.1. Silicone-based thermal interface materials 2.2. Non-silicone thermal interface materials 3. Conclusion In

tesa® 4928

https://prostech.ph/tesa-4928/

tesa® 4928 is a transparent double-sided self-adhesive tape consisting of a PET backing and a modified acrylic adhesive. Features An

SILCOOL™ TIA0260 SILICONE ADHESIVE

TDS:Download

Get MSDS