SNAPSIL FRV1106 is a one-component, ready-to-use fluorosilicone adhesive sealant that cures to a tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. SNAPSIL FRV1106 adhesive sealant is a paste consistency, fluid resistant product designed for use in fuel, solvent and chemical environments.
Key Features
Resist swelling by hydrocarbon solvents, dimethyl silicone fluids and fuels
One component product
Primerless adhesion to many substrates
Room temperature cure
Non-sag paste consistency
Retain elastomeric properties at temperatures of -60 °C to 204 °C for long periods and to 260 °C for short periods.
Ozone resistant, high quality weatherability
Excellent electrical insulation properties
Applications
SNAPSIL FRV1106 adhesive sealant is ideally suited for use in applications where resistance to the swelling effects of fuels, oils, solvents and chemicals is needed. Providing a formed-in-place gasket for pipe junctions in chemical plants, sealing seams on liquid holding tanks and bonding sensing devices in a gas tank are typical applications. The paste consistency of these sealants allows them to be applied even on vertical and overhead surfaces in thickness up to 6 mm (1/4 in.).
Typical Properties
Uncured Properties:
FRV1106
Color
Red
Consistency
Paste
Specific Gravity
1.45
Application Rate, gm/min.
88
Tack Free Time, minutes
20
Cure Through Time, hours
24
Cured Properties (1)
Mechanical:
Hardness, Shore A
39
Tensile Strength, (psi) MPa
(485) 3.33
Elongation, %
200
Tear Strength, (psi) MPa
(61) 0.42
Peel Strength, (lbs/in) kg/mm
(26) 0.46
(1) Cure time 7 days at 25 ºC (77 ºF), 50 % relative humidity.
