Dymax SpeedMask 750 UV/Visible light curable masking resin is formulated to provide excellent surface protection during higher temperature thermal spray coating, plasma spray, and HVOF processes as well as aggressive grid blasting. This masking resin is easily removed by incineration in an air furnace at a minimum temperature of 650°C [1200°F]. 750 can also be removed from the coated substrate after short exposures to warm water (60°C +) or warm air. This exposure will soften the maskant and allow for easier removal.
Dymax SpeedMask 750 is recommended for surfaces such as nickel alloys, titanium alloys, and cobalt chrome.
Viscosity (nominal)
30000 cP
Shore Hardness
A50
Modulus of Elasticity MPa [psi]
2.5 [370]
Cure Time
45 seconds
Package Sizes Available
30 ml syringe
160 ml cartridge
300 ml cartridge
550 ml cartridge
15 liter pail
