Product Introduction
VieTape FS5701 ENHANCED SEALABILITY is an advanced adhesive tape designed to deliver superior sealing performance. It is suitable for a wide range of industrial applications, offering excellent durability and ease of installation for reliable sealing and protection of joints and connections.
VieTape FS5701 ENHANCED SEALABILITY Features:
- High sealing capability
- Easy to use and install
- Exceptional durability
VieTape FS5701 ENHANCED SEALABILITY Applications:
- Sealing and protecting joints and connections in industrial environments
- Ideal for applications requiring superior sealing and high durability
About Prostech
Prostech Philippines is a one-stop solution provider for specialty materials and equipment across electronics manufacturing, from PCBA to final assembly. Our core material and equipment solutions include:
- PCB Assembly Materials
- Cleaning & Degreaser
- Circuit Board Protection
- Thermal Management Solutions
- EMI Shielding
- General Assembly Adhesives
- Elastomeric Materials
- Process Equipment: Potting & Coating Systems, UV/ Heat Curing, Plasma Treatment, Tape placement automation, and cleaning machines
Technical Added Value to customer
Prostech offers customized material and process equipment solutions with engineering support throughout R&D, production process optimization, and performance validation. Our in-house lab located in Alabang, Muntinlupa is equipped to conduct electronics material testing, application simulation, and adhesive validation, helping customers reduce the need for onsite trials and accelerate implementation.
International Supply Chain Advantage
Regional warehouse hubs across Vietnam, Singapore, Malaysia, and the Philippines ensure cross-border reliable supply. In Philippines PEZA-bonded warehouse located at Lima Industrial Park, Batangas enables Prostech to provide responsive, demand-based delivery and significantly shortens standard lead time for Philippines customers.
Need help selecting the right product or solution?
PROPERTY | TEST METHOD |
| VALUE |
|
PHYSICAL | ||||
Density, kg /m3 (lb. / ft3) Tolerance, % | ASTM D 3574-95, Test A | 240 (15) | 320 (20) | 480 (30) |
| ± 10 |
| ||
Thickness, mm (inches) |
| 4.78 – 12.70 (0.188-0.500) | 1.57 – 3.18 (0.062- 0.125) | 0.79 – 1.14 (0.031-0.045) |
Tolerance, % | ± 10 |
| ± 20 | |
Standard Color (Code) |
| Black (04) | ||
Compression Force Deflection, kPa (psi) Typical, kPa (psi) | 0.51 cm/min (0.2” / min.) Strain Rate | 41 – 83 | 76 – 138 | 138 – 317 |
Force Measured @25% Deflection | (6 – 12) 64 (9.3) | (11 – 20) 103 (15) | (20 – 46) 193 (28) | |
Hardness, Durometer, Shore “O” | ASTM D 2240-97 | 18 | 24 | 55 |
Compression Set, % max. after 24 | ASTM D 3574-95 | 5 | ||
hour recovery | Test D @23oC(73oF) ASTM D 3574-95 |
10 | ||
| Test D @70oC (158oF) | 5 | ||
| ASTM D 3574-95 Test J/Test D |
| ||
| autoclaved 5 hrs @121oC (250oF) |
| ||
Dimensional Stability, % max. change | 22 hrs @80oC (176oF) in a forced-air oven | ± 2 | ||
Tensile Strength, min. kPa (psi) | ASTM D 3574-75 Test E | 276 (40) | 517 (75) | 827 (120) |
Tensile Elongation, % min. | ASTM D 3574-75 Test E | 100 | 100 | 100 |
Tear Strength, Min. kN/m (pli), | ASTM D 264-91 Die C | 1.1 (6) | 1.4 (8) | 2.6 (15) |
Typical kN/m (pli) |
| 1.8 (10) | 2.3 (13) | 3.2 (18) |
ELECTRICAL AND THERMAL | ||||
Dielectric Constant, K’ (“DK”) | ASTM D 150 measurements at 22oC (72oF) relative humidity 50% for 24 hrs. | 1.71 | ||
Dielectric Strength, kVm (volts/mil) | ASTM D 149-97a | 1969 (50) | ||
Dissipation Factor, tan D (“DF”) | ASTM D 150-98 | 0.05 | ||
Volume Resistivity, ohm-cm | ASTM D 257-99 | 1 x 1012 | ||
Surface Resistivity, ohm/sq. | ASTM D 257-99 | 2 x 1012 | ||
Thermal Conductivity, W/m-C (BTU-in./hr/ft2-F) | ASTM C 518-98 | – | – | – |
Coefficient of Thermal Expansion |
| 2.3-3.1 x 10-4 in/in/oC (1.3-1.7×10-4in/in/oF) | ||
TEMPERATURE RESISTANCE | ||||
Recommended Constant Use, max. | SAE J-2236 | 90oC (194oF) | ||
Recommended Intermittent Use, max. |
| 121oC (250oF) | ||
Embrittlement | ASTM D 746-98 | – | ||
Cold Flexibility | MIL-P-12420D 1991 @-40oC (-40oF) | Pass | ||
FLAMMABILITY AND OUTGASSING | ||||
Flammability, mm (inches) | UL 94HBF (File E20305) (Pass ≥) |
| 4.8 (0.188) |
|
MVSS 302 (Pass ≥) |
| – |
| |
CSA Comp HBF(File 188149) (Pass ≥) |
| – |
| |
Fogging | SAE J-1756 3 hrs @100oC (212oF) | – | ||
Outgassing, Total Mass Loss (TML) % | ASTM E 595-93 24 hrs @125oC (257oF) @ <7×103 Pa | 0.84 | 0.97 | 1.0 |
Outgassing, Collected Volatile Condensable Materials (CVCM) % |
| 0.05 | 0.04 | 0.06 |
Outgassing, Water Vapor Regain (WVR) % |
| 0.4 | 0.46 | 0.65 |
ENVIRONMENTAL | ||||
Gasketing and Sealing | UL JMST2 (Consisting of UL50 and UL508) CAN/CSA – C22.2 No. 94-M91 | File MH15464 File 188149 | ||
Moisture Absorption, High Humidity Exposure, % weight gain, typical | AMS 3568-95 | 3 | ||
Water Absorption, Immersion Testing, % weight gain, typical | ASTM D 570-95 | 15 | 13 | 6 |
UV Resistance | ASTM G 53-96 | – | ||
Ozone Resistance | GM 4486P-95 | – | ||
Corrosion Resistance | AMS 3568-91 | – | ||
Mildew/Bacteria Resistance | ASTM G 21 | Good | ||
Staining | ASTM D 925 | No Stain | ||
Skin Contact Irritation | Primary Skin Irritation Test (FHSA) | Pass | ||
