Consistent UV curing requires periodic monitoring of UV intensity or dose. The ACCU-CAL 150 radiometer is simple to operate and offers repeatable measurement of UV light.
The ACCU-CAL 150 can measure UV light up to 10W/cm² emitted from the stationary light-curing flood lamps or lamps used in conveyorized processes. This radiometer can be used to determine intensity (measured in mW/cm²) or total energy as derived from intensity and exposure time (measured in mJ/cm²). The ACCU-CAL 150 radiometer greatly simplifies both validating and monitoring a UV light-curing process.
FEATURES:
Simple to operate
PTB and NIST Traceable
CE Marked
BENEFITS:
Validating and maintaining a Light-Curing Process
Measuring Transmission Rates through substrates
Light Sources
UV light-curing flood lamps and conveyor systems
Spectral Sensitivity
320 to 390 nm
Intensity Range
10 mW/cm² to 10 W/cm²
Accuracy
± 10%, ±5% typical
Resolution
Intensity (1 mW/cm²)
Dose (1 mJ/cm²)
Calibration Period
6 months
Operating Temperature Ranges
0-75°C internal temperature; tolerates high external temperatures for short periods
Measurements
Peak intensity (mW/cm²)
Dose (mJ/cm²)
Power Supply
Two (2) AAA batteries
Battery Life
20 hours with display on (automatic shutoff after 2 mins)
