Devcon® MA2060 is a flexible, two component acrylic adhesive product designed with low halogen content for structural bonding. It is well suited for structural bonding application on various substrates, such as metal and plastics, where temperature shock, vibration resistance and mechanical impact resistance are required. The product has a work time of 3-4 min and cures rapidly to form tough, resilient bonds. Once mixed with static mixer, the two component acrylic cures at room temperature to an extent approximately 50% within 10 minutes and the cure time can be reduced with the aid of mild heat to the bonded assemblies. Typical applications include structural bonding of plastic and metal components that must withstand vibrations and impacts such as in portable electronic device and specialty vehicle markets.
Applications
Devcon® MA2060 may be applied manually or with all stainless steel bulk dispensing equipment. Static mixer selection is critical to the proper mixing and performance of ITW adhesives. All machines dispensing ITW should have shrouds where applicable. Stainless Steel bulk equipment is
recommended. For additional information concerning meter-mix equipment, contact ITW Sales Representatives. Pre-measured cartridges are also available, as well as the hand-held guns with which to dispense the adhesive.
| Chemical Class | Acrylic |
| Appearance(Part A) | Viscous white liquid |
| Appearance(Part B) | Viscous blue liquid |
| Appearance(mixed) | Blue |
| Components | Two component-requires mixing |
| Mix Ratio by Volume | Part A: Part B=10:1 |
| Application | Bonding Solutions |
