MXBON22698 is a medium viscosity, low blooming and low odor Cyanoacrylate adhesive. It is the first low odor, low blooming, cyanoacrylate adhesive, capable of withstanding temperature up to +150 Celsius degree with prolonged exposure while maintaining its performance and adhesion strength. Moreover, it can withstand temperature fluctuations upto +170 Celsius degree, making it a truly thermally resistant adhesive. MXBON22698 can be used for bonding a variety of plastics, metals and rubbers especially where a good cosmetic outcome is desired, it is also suitable for applications where vapor control is difficult. MXBON22698 is a one-component, solvent-free system and does not require the use of a catalyst, heat or clamps. When a thin layer of MXBON22698 applied between two surfaces comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond.
DIRECTIONS FOR USE:
Make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics, glass, and rubber, and to acid-treat metals).
Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.
Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute. (Maximum strength is achieved in 24 to 48 hours).
Wipe off excess adhesive from the top of the container and recap MXBON22698 if left uncapped, may deteriorate by contamination from moisture in the air.
HANDLING AND STORAGE:
Storage: Keep products in the unopened container in a cool and dry location. Best when stored at 2 to 8ºC. Temperatures less than 2ºC can adversely affect product properties. Do Not Freeze. Keep container tightly closed until ready for use.
Handling: Material removed from containers may be contaminated during use. Do not pour back any product to the original container. Misuse of product will void all warrantees.