PERMABOND TA430 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics, wood, and some thermoplastics. This adhesive may be used in a variety of structural bonding applications due to its versatile performance capabilities.

Permabond TA430 provides high strength while maintaining excellent flexibility, resulting in tough, durable bonds with outstanding impact and peel resistance. Handling strength is achieved in a few minutes at room temperature by using Permabond Initiator 41.

FEATURES:

Adhesion to a wide variety of substrates
Fast cure at room temperature
No mix application
High shear and peel strength
Good impact strength
Good chemical resistance

APPLICATIONS:

Bonding metals, ferrites, ceramics, wood, and some thermoplastics

Typical Properties

PHYSICAL PROPERTIES OF UNCURED ADHESIVE

Chemical composition	Modified acrylic – solvent free
Appearance	Transparent amber liquid
Viscosity @ 25°C	20rpm: 15,000 – 30,000 mPa.s (cP) 2.5rpm: 45,000 – 80,000 mPa.s (cP)
Specific gravity (resin)	1.1

TYPICAL CURING PROPERTIES

Ratio of use	10:1.5 approximately
Maximum gap fill	0.5 mm (0.02 in)
Fixture time (zinc) @23°C	1-2 mins
Handling time (zinc) (0.3 N/mm² shear strength is achieved) @23°C	3-5 mins
Working strength (zinc) @23°C	40-60 mins
Full cure @23°C	24 hours